 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| ISTS150, ISTS832S, ISTS832SD ISTS250, ISTS822S, ISTS822SD TRANSMISSIVE OPTO-ELECTRONIC DUAL CHANNEL SLOTTED INTERRUPTER SWITCHES WITH TRANSISTOR SENSORS 17.8 E 24.2 3.2 DIA 2 PLCS 1 E Dimensions in mm 11.4 7.9 7.4 2.54 10.4 10.0 0.45 0.40 11.5 5.4 2.8 7.9 7.4 11.4 2.54 10.4 10.0 0.45 0.40 11.5 2.8 OPTICAL CENTRE LINE 2.8 1 7.62 8 7 6 5 OPTICAL CENTRE LINE 2.8 7.62 2.54 2.54 ISTS250 ISTS822S ISTS822SD 2 3 4 ISTS150 ISTS832S ISTS832SD DESCRIPTION This series of photointerrupters are dual channel switches consisting of two Gallium Arsenide infrared emitting diodes and two NPN silicon photo transistors mounted in a "side by side" configuration on opposite sides of a 2.5mm wide slot. Dual channels enable direction of travel sensing. The transmissive housing reduces possible interference from ambient light and provides dust and dirt protection. In addition the ISTS822S, ISTS832S have 0.25mm apertures in front of the phototransistors, While the ISTS822SD, ISTS832SD have the same sized apertures in front of both emitters and phototransistors FEATURES l Single or Double apertures for High Resolution l 2.5mm Gap between LED and Detector l Dual channels "side by side" APPLICATIONS l Copiers, Printers, Facsimilies, Record Players, Cassette Decks, VCR's ABSOLUTE MAXIMUM RATINGS (25C unless otherwise specified) Storage Temperature -40C to + 85C Operating Temperature -25C to + 85C Lead Soldering Temperature (1/16 inch (1.6mm) from case for 10 secs) 260C INPUT DIODE Forward Current Reverse Voltage Power Dissipation OUTPUT TRANSISTOR Collector-emitter Voltage BVCEO Emitter-collector Voltage BVECO Collector Current IC Power Dissipation 30V 5V 20mA 75mW 50mA 5V 75mW ISOCOM COMPONENTS LTD Unit 25B, Park View Road West, Park View Industrial Estate, Brenda Road Hartlepool, Cleveland, TS25 1YD Tel: (01429) 863609 Fax :(01429) 863581 24/9/97 ISOCOM INC 720 E., Park Boulevard, Suite 104, Plano, TX 75074 USA Tel: (972) 423-5521 Fax: (972) 422-4549 DB92003-AAS/A1 ELECTRICAL CHARACTERISTICS ( TA = 25C Unless otherwise noted ) PARAMETER Input Forward Voltage (VF) Reverse Voltage (VR) Reverse Current (IR) Collector-emitter Breakdown (BVCEO) ( Note 1 ) Emitter-collector Breakdown (BVECO) Collector-emitter Dark Current (ICEO) MIN TYP MAX UNITS 1.2 3 10 30 5 100 1.6 V V A V V nA TEST CONDITION IF = 20mA IR = 10A VR = 3V IC = 1mA IE = 100A VCE = 10V Output Coupled On-State Collector Current IC ( ON ) ( Note 1 ) ISTS150, ISTS250 ( no apertures ) 250 A A A 20mA IF , 10V V CE 20mA IF , 10V VCE 20mA IF , 10V V CE ISTS822S, ISTS832S 250 (0.25mm apertures phototransistors only) ISTS822SD, ISTS832SD ( 0.25mm apertures in front of both - emitters and phototransistors ) 100 Collector-emitter Saturation VoltageVCE(SAT) ISTS150, ISTS250 ISTS822S, ISTS832S ISTS822SD, ISTS832SD 0.4 0.4 0.4 V V V 20mA IF , 125A IC 20mA IF , 125A IC 20mA IF , 50A IC Rise Time Fall Time tr tf 6 6 s s VCC = 5V, IF = 20mA, RL= 100 Note 1 Special Selections are available on request. Please consult the factory. 24/9/97 DB92003-AAS/A1 Collector Power Dissipation vs. Ambient Temperature 100 Collector power dissipation PC (mW) Normalized output current 10 4 2 1 0.4 0.2 0.1 0.04 0.02 0.01 0.1 Normalized Output Current vs. Collector-emitter Voltage IF = 50mA 30mA 20mA 10mA 5mA Normalized to IF = 20mA VCE = 10V Pulsed PW = 100s PRR = 100pps 10 100 75 50 25 0 -25 0 25 50 75 100 125 Ambient temperature TA ( C ) Forward Current vs. Ambient Temperature 60 Normalized output current 50 Forward current IF (mA) 40 30 20 10 0 -25 0 25 50 75 100 125 Ambient temperature TA ( C ) Collector-emitter saturation voltage VCE(SAT) (V) Normalized Output Current vs. Ambient Temperature 1.5 Normalized output current TA = 25C 1 Collector-emitter voltage VCE ( V ) Normalized Output Current vs. Forward Current Normalized to IF = 20mA VCE = 0.4V Pulsed PW = 100s PRR = 100pps T A = 25C 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 1 2 5 10 20 50 Forward current IF (mA) Collector-emitter Saturation Voltage vs. Ambient Temperature 0.28 0.24 0.20 0.16 0.12 0.08 0.04 0 -25 0 25 50 75 100 Ambient temperature TA ( C ) DB92003AAS/A1 IF = 20mA VCE = 10V IF = 20mA IC = 50A 1.0 0.5 0 -25 0 25 50 75 100 Ambient temperature TA ( C ) 24/9/97 |
Price & Availability of ISTS250
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |